Hammer effect spray paint HAMERTON

Decorative anti-corrosion paint based on acrylic resins. It dries quickly, forming a film on the surface that protects against atmospheric influences and metal corrosion. Due to its composition, the paint can be applied to the surface without prior treatment with an anti-corrosion soil. After applying the surface, a hammer effect is formed, which allows you to hide surface irregularities.

Фото

Scope:

It is used for decorative and anti-corrosion treatment of metal and galvanized surfaces. It can also be applied to plastic, wood and concrete surfaces to obtain a decorative effect. You can use both internal and external works.

Surface preparation:

Remove the existing old paint with a scraper or steel brush until a strong and clean base is obtained. Also remove dirt that complicates painting. It is necessary to apply exclusively on a dry and clean surface.

Applying:

The aerosol can should be shaken for 30 seconds. Spraying is carried out from a distance of 20-30 cm. The recommended air and surface temperature is from 15°С to 25°С, with a relative humidity of no more than 70%. It is applied in two layers with an interval of 5-10 minutes between layers. Complete drying for 1 hour. Consumption of 1 m2 per 2 layers.

Storage conditions and time:

Store in a cool, dry place. Avoid direct sunlight. Do not allow storage at temperatures below 5°C. The shelf life is 24 months at a temperature of 20°C.

Packaging:

400 ml.