Paint with a metal effect Mirox

Decorative anti-corrosion paint based on an alkyd resin modified with epoxide with the addition of components that ensure high temperature resistance of painted metal surfaces. It dries quickly, forming a film on the surface that protects against corrosion and weathering. Due to its composition, the paint can be applied to rust without pre-treating the surface with anti-corrosion primer. After application, the coating has the appearance of a fine texture, which allows you to hide surface irregularities.

Packaging

0.75 L, 2.25 L

Usage

Indoors and outdoors

Gloss level

30 (Semi-matte)

Can be repainted at 23°C 50% RH

30 min.

Drying time, 23°С 50% RH

3-6 hr

Consumption

10-12 m2/L

Thinner

Mixon Eco Thinner

Working tools

Roller, brush, spray gun

Storage

3 years t > 0oC

Фото

Scope:

It is used for decorative and anti-corrosion treatment of metal and galvanized surfaces. It can also be applied to plastic, wood and concrete surfaces to obtain a decorative effect. You can use both internal and external works.

Surface preparation:

Remove the existing old paint with a scraper or steel brush until a strong and clean base is obtained. Also remove dirt that complicates painting. It is necessary to apply exclusively on a dry and clean surface.

Applying:

Before applying the paint, you need to mix thoroughly. When using a brush, apply one dense layer without using a solvent. With pneumatic spraying, the paint must be diluted by 10-20% with MIXON Eko Thinner solvent. Necessary spray viscosity – 20-22 sec. DIN 4 at 20°S. It is applied in 2-3 layers with a paint gun. The nozzle diameter is 1.3-1.5 mm. Pressure – 2-3 bar. The interval between layers is 10-15 minutes.

Technical specifications