Refueling cylinder Mixon MIX Spray

Aerosol semi-product for professional use. Contains gas, solvents and special additives. Intended for further filling up to 100 ml of LFM based on solvent.

Filling instructions:

Before filling a new type of paint, testing must be done to check for compatibility. Attention! A slight change of color is possible. The company that fills the cylinder with enamel bears full responsibility for the quality of the final product, as well as for the composition of the dangerous substances indicated on the label.

Method of administration:

Clean the surface of dirt, rust and dust. Shake the balloon for 30 seconds. Make a test spray. Painting should be carried out from a distance of 20-30 cm.
To achieve a better result, the paint must be applied in 2-3 thin layers with an interval of 5-10 minutes at an ambient temperature not lower than 16°C. After partial use of the product, the cylinder must be turned over and sprayed for several seconds to clean the nozzle and the supply channel inside the cylinder from paint residues.

Packaging:

400 ml.