Acrylic-latex structural paint Exterior M

Structural basic facade paint for processing new and previously painted mineral surfaces during external and internal work. First of all, it is intended for painting facades and plinths of residential buildings, public and industrial buildings. The use of structural paint will help seal holes in the surface of lightweight concrete and joints, reducing the danger of cold damage.

Packaging

10 L

Usage

Indoors and outdoors

Can be repainted at 23°C 50% RH

1-2 hr

Drying time, 23°С 50% RH

2 hr

Consumption

2 m2/L

Thinner

Water

Working tools

Roller, brush, spray gun

Storage

2 years t > 5OC

Scope of use:

The paint is suitable for painting concrete and light concrete surfaces, as well as a highly associated plastered surface.

Surface preparation:

The painted surface must be dry and cleaned of dust, dirt, grease and lagging particles. Depending on the type of contamination, choose the appropriate method of surface cleaning. Avoid using cleaning methods that can damage the base surface. Remove the old lagging paint from the surface. Clean the porous, loosely connected or ground surface to a strong base, scrape the cracks to clean and repair. Make sure that the new plastered surface is dry and finally carbonated (minimum 28 days).

Priming:

Strongly associated non-porous base surfaces do not require separate priming. The porous surface must first be primed with primer for the facade surfaces of the Mixon Aq-uastop F, diluting it with water in a ratio of 1:7. To avoid stains, it is recommended to prime 2-3 times. Before painting, the surface must be completely dry.

Applying:

Exterior M apply to the base surface with a plasterer, roller or spatula. Then give the treated surface the desired structure, using various working tools for this: structural roller, ring brush, sponge, spatula, etc. Apply structural paint to the surface in one or two layers. When applied in two layers, the treated surface will be smoother.

Technical specifications