Mineral plaster Bark beetle М-100

Plaster solution for external and internal use, designed for finishing walls and ceilings with noble plaster with a quartz structure «Bark beetle». Plaster is a material based on dolomite crumb with grain sizes: 2.0 mm, 2.5 mm, 3.5 mm. The solution contains hydrophobic substances that limit water absorption.

Packaging

25 kg

Usage

Indoors and outdoors

Grain

2.0 mm, 2.5 mm, 3.5 mm, 4.0 mm

Drying time, 23°С 50% RH

6-24 hr

Consumption

2.0 mm - 3.0 kg/m2; 2.5 mm - 3.5 kg/m2; 3.5 mm - 4.0 kg/m2; 4.0 mm - 4.5 kg/m2

Thinner

Water

Working tools

Spatula

Storage

2 years t > 0oC

Фото

Scope:

Thin-layer plaster is used as the last layer. It can also be used in the after-insulation system and for mineral wool. Provides alignment of small irregularities of the surface being treated. Plaster coatings can be painted with Mixon paint of any color.

Surface preparation:

Plaster is characterized by good adhesion to the surfaces of any building materials. Surface preparation consists in cleaning from dust and grease, cleaning from old paint and plaster coatings. A Mixon A100 primer should be used before applying plaster to any surface.

Preparation of the mixture:

Pour the dry mixture into clean water and stir until a homogeneous mass is formed (kneading ratio: 5 liters of water per 25 kg of the mixture). After 10 minutes, the solution can be applied to the surface. The finished solution retains its properties for 1 hour. Plastering work is performed at temperatures from +5OC to +25OC. In the process of work, it is necessary to constantly mix the solution to maintain a uniform consistency. To avoid visible joints, plaster must be applied without interruption until the wall «is completely covered from edge to edge». It is applied to the surface with a stainless steel grater, then the desired texture is created with a plastic grater. After finishing work, the tools must be washed with water.

Attention: Protect from direct sunlight, wind and rain until it dries completely. Apply plaster to cement, cement-lime, concrete bases after 28 days of natural drying of the base.

Technical specifications