Mineral plaster Lamb М-105

Plaster solution for external and internal use, intended for finishing walls and ceilings with noble plaster with a quartz structure «lambs». Plaster is a dolomite crumb-based material with grain sizes: 1.5 mm, 2.0 mm, 2.5 mm. The solution contains hydrophobic substances that limit water absorption.

Packaging

25 kg

Usage

Indoors and outdoors

Grain

1.5 mm, 2.0 mm, 2.5 mm

Drying time, 23°С 50% RH

6-24 hr

Consumption

1.5 mm - 3 kg/m2; 2.0 mm - 3,5 kg/m2; 2.5 mm - 4 kg/m2

Thinner

Water

Working tools

Spatula

Storage

2 years t > 0oC

Фото

Scope:

Thin-layer plaster is used as the last layer. It can also be used in the after-insulation system and for mineral wool. Provides alignment of small irregularities of the surface being treated. Plaster coatings can be painted with Mixon paint of any color.

Surface preparation:

The surface to be treated must be dry, free of grease, contaminants and lagging particles.

Preparation of the mixture:

Pour the dry mixture into clean water and stir until a homogeneous mass is formed (kneading ratio: 5 liters of water per 25 kg of the mixture). After 10 minutes, the solution can be applied to the surface. The finished solution retains its properties for 1 hour. Plastering work is performed at temperatures from +5oC to +25oC.
In the process of work, it is necessary to constantly mix the solution of maintaining a uniform consistency.
To avoid visible joints, plaster must be applied without interruption until the wall «is completely covered from edge to edge».

Attention: Protect from direct sunlight, wind and rain until it dries completely. Apply plaster to cement, cement-lime, concrete bases after 28 days of natural drying of the base.

Technical specifications