Silicone plaster Lamb A-105 Sil

Ready-to-work aqueous dispersion of organic binders and silicone resins. The result of the application is the structural surface of «lambs» with a grain size of 1.5 mm or 2.5 mm. Plaster is resistant to atmospheric and mechanical influences. It has good elasticity and water-repellent properties. Creates a vapor and gas-permeable, hydrophobic coating that has the ability to self-clean.

Packaging

10 L/16 kg

Usage

Indoors and outdoors

Grain

1.5 mm, 2.5 mm

Drying time, 23°С 50% RH

6-24 hr

Consumption

1.5 mm - 3 kg/m2; 2.5 mm - 4 kg/m2

Thinner

Water

Working tools

Spatula

Storage

2 years t > 0oC

Фото

Scope:

It is intended for decorative thin-layer surface decoration on concrete, brick and plastered bases, as well as in thermal insulation systems of facades and on mineral wool. It is used for internal and external works.

Surface preparation:

The surface to be treated must be dry, free of grease, contaminants and lagging particles.

Priming:

The surface must be primed with an acrylic-silicone primer Mixon A100.

Applying:

Mix thoroughly before application. A small amount of water (0.1 L per bucket) can be added as needed. Gradually apply to the base with a steel grater at an angle of 60° to the surface. The thickness of the applied layer should correspond to the size of the aggregate grains. After the applied coating stops sticking to the tool, it is possible to form the structure of the plaster surface with a plastic grater. The homogeneous texture of the surface in the form of tightly laid crumb grains is formed by circular movements of the plastic grater. At the same time, the grater is kept parallel to the treated surface.

Attention: Protect from direct sunlight, wind and rain until it dries completely. Apply plaster to cement, cement-lime, concrete bases after 28 days of natural drying of the base.

Технические характеристики